How do I fix McAfee installation error: Error code 0
P
Paul Troy
建立主題
5個月 之前
When you think of installing one of the
McAfee products on your device and suddenly what you see is you are unable to
install it due to certain unknown reasons. The issue is usually accompanied
with an error message which tells you that you cannot install the software any
longer or something has went wrong during the installation process.
However, you may easily get rid of the issue
by following some workarounds.
Well, I would suggest you to download and
use McAfee pre-install tool. The said tool prepares your device for the
installation and also lets you know what is needed for the uninterrupted
installation.
2.Try to reinstall the software
Other than this, if you do not wish to
download the tool, then you may give it another try by navigating to
mcafee.com/activate. But, prior to that, make sure you remove the junk files
and files from the cache memory of your device.
3.Use a different browser
Sometimes, the root cause of the
installation issue is the settings of the web browser you are trying to install
from. In this scenario, you may try switching to another web browser.
4.Temporarily disable the
firewall
If you have activated a firewall on your
device and restricted certain programs to download, then you may turn off the
firewall temporarily and try again later.
5.Fix issue with the DNS
Last but not the least you may try changing
the DND settings of your device as this may help you in getting rid of the
issue. Sometimes, it is too slow and restricts the installation of the
software.
Hence, if you wish to install McAfee
security solution without any interruption, then you may consider following
these workarounds so that you do not come across the same error again.
一則評論
l
lewis hamilton
說
3個月 之前
Cleanup Unsuccessful If you see this message, the cleanup did not go as planned:
Paul Troy
When you think of installing one of the McAfee products on your device and suddenly what you see is you are unable to install it due to certain unknown reasons. The issue is usually accompanied with an error message which tells you that you cannot install the software any longer or something has went wrong during the installation process.
However, you may easily get rid of the issue by following some workarounds.
Workarounds to fix the issue (Mcafee.com/activate )
1. Use McAfee pre-install tool
Well, I would suggest you to download and use McAfee pre-install tool. The said tool prepares your device for the installation and also lets you know what is needed for the uninterrupted installation.
2. Try to reinstall the software
Other than this, if you do not wish to download the tool, then you may give it another try by navigating to mcafee.com/activate. But, prior to that, make sure you remove the junk files and files from the cache memory of your device.
3. Use a different browser
Sometimes, the root cause of the installation issue is the settings of the web browser you are trying to install from. In this scenario, you may try switching to another web browser.
4. Temporarily disable the firewall
If you have activated a firewall on your device and restricted certain programs to download, then you may turn off the firewall temporarily and try again later.
5. Fix issue with the DNS
Last but not the least you may try changing the DND settings of your device as this may help you in getting rid of the issue. Sometimes, it is too slow and restricts the installation of the software.
Hence, if you wish to install McAfee security solution without any interruption, then you may consider following these workarounds so that you do not come across the same error again.